Students


Ph.D

    1 Satish Daulatrao Dhandole: Studies in Structural and Acoustic Finite Element Model Updating with Application to Vibro-Acoustic Design of Cavities

    (Completed, 2009)


    2 Manoj Chouksey: Studies in Modal Analysis, Frequency Response Characteristics and Finite Element Model Updating of Rotor Systems (Supervised jointly with Prof. J.K. Dutt)

    (Completed, 2011)


    3 Sharad Pradhan: Finite element model updating of damped structures using frequency response data

    (Completed, 2014)


    4 Deepak Nehete: Finite Element Model Updating of Vibro-Acoustic Cavities (Supervised jointly with Prof. K. Gupta)

    (Completed, 2016)


    5 Ashok Kumar: Active Structural-Acoustic Control of Interior Noise in Vibro-acoustic Cavities

    (Completed, 2016)


    6 Amrita Puri: Active Control of Noise in Vibro-acoustic Cavities (Supervised jointly with Prof. K. Gupta)

    (Completed, 2019)


    7 Asish Kumar Panda: Stochastic Finite Element Model Updating using Frequency Response Functions

    (Completed, 2023)


    8 Nikhil Sharma: Stochastic Finite Element Model Updating using modal data

    (Completed, 2024)


    9 Sesa Deba Pani

    (In progress)


    10 Jigiasu Kumar

    (In progress)





M. Tech/ M.S. (Masters Thesis)

    1 2024 Shubham Dey: Causative analysis of vibrations in a Gas turbine generator (in progress)

    2 2023 Manish Kumar (MS-R): Optimal design of Helmholtz resonators for noise reduction in acoustic cavities

    3 2023 Basavaraj. H. Dindur: Active Control of Interior Noise Using Virtual Sensing

    4 2021 Urvilkumar Doshi: FE Model Updating using Uncorrelated Modes

    5 2021 Rajat Ranjan: Acoustic control in cavities using Helmholtz resonators

    6 2020 Pyla Ramanaraju: Studies in identification of dynamic forces using vibration measurements

    7 2020 Tushar Sharma: Active Control of Noise in Acoustic Cavities

    8 2019 RojenKoshy John: Acoustic FE Model Updating using acoustic transfer functions (Jointly with Prof. T.K. Kundra)

    9 2018 Abhinav Singhal: Active Control of Noise in Enclosed spaces

    10 2017 Vikas Pandey: Active Noise control in ducts

    11 2016 Nikhil Saxena: Damage Detection In Structures Using A Model Updating Framework (Jointly with Prof. T.K. Kundra)

    12 2016 Palash Pare: Rotor fault diagnosis using Modal analysis data (Jointly with Prof. J.K. Dutt)

    13 2015 Abhishek Kumar: Estimation of Stresses in structures using Vibration Measurements (with Prof. T.K. Kundra)

    14 2014 Deepak Kumar: Operational Modal Analysis using Random Decrement (with Prof. T.K. Kundra)

    15 2013 Shashank Mishra: Studies in coupled structural analysis using modal models (with Prof. T.K. Kundra)

    16 2013 Vishal Dwivedi: Studies in finite element modeling, modal Testing and model updating of shell structures (with Prof. T.K. Kundra)

    17 2012 Nitesh Goyal: Studies in analytical and experimental modal analysis of stiffened structures (with Prof. T.K. Kundra)

    18 2012 Gurpreet singh: Studies in FE modelling of rotor-shaft systems (with Prof. J.K. Dutt)

    19 2012 Dinesh Sharma: Development of concurrent engineering models in mechanical design (with Prof. T.K. Kundra)

    20 2012 Avadesh Kumar Meena: Studies in Modal analysis of coupled structures using component mode synthesis (Jointly with Prof. T.K. Kundra)

    21 2010 Ravi Dhingra: Studies in Optimal SDM to Improve Dynamic Design of Mechanical Structures (with Prof. T.K. Kundra)

    22 2010 V.China Saidaiah: Studies in modal model identification and dynamic design using output-only data (with Prof. T.K. Kundra)

    23 2010 Vivek Rawat: Studies in use of transmissibility estimates for operational modal analysis (with Dr. S. Chauhan (B&K Denmark))

    24 2010 Nitin Bagate: Studies in lean design concepts in Mechanical equipment design (with Prof. T.K. Kundra)

    25 2010 Saurabh Sharma: Experimental modal analysis of a compressor shaft with carbon fibre reinforced plastic rotor (Thesis work Under DADD program at TU Darmstadt, Germany)

    26 2009 Madhava Krishna Tippa: Identification Of Dynamic Forces Using Experimental Modal Analysis (with Prof. T.K. Kundra)

    27 2009 Monojit Kumar Choudhury: Finite Element Model Updating and Dynamic Design of Spot welded Structures (with Prof. T.K. Kundra)

    28 2009 Gaurav Singh: Studies in Operational Modal Analysis of Mechanical Structures (with Prof. T.K. Kundra)

    29 2008 Anand D. Jere: Studies in Localized Nonlinearity Identification Techniques (with Prof. T.K. Kundra)

    30 2008 Mathe Shriram Subhash: Operational Modal Analysis And Experimental Modal Analysis Studies For Dynamic Design (with Prof. T.K. Kundra)

    31 2008 Krishnagoud Manda: Sensitivities Of Eigenvalues And Eigenvectors Of Gyroscopic Rotor Systems May 2008 (Thesis work Under DADD program at TU Darmstadt, Germany)

    32 2007 J.G.V. Dattu: Dynamic design of automotive structures (with Prof. T.K. Kundra)

    33 2007 Sheikh Shoieb: Operational modal analysis of automotive structures (with Prof. T.K. Kundra)

    34 2007 S. S. Reddy: Modal Analysis of rotors (with Prof. J.K. Dutt)

    35 2007 N. Rajesh: Modal testing and Finite Element model updating of a Machine tool structure

    36 2007 Sandeep Kumar: (MS Thesis) Studies in OMA of Complex Mechanical structures (with Prof. T.K. Kundra)

    37 2006 Aditya Gondhalekar: Studies in dynamic design and operational modal analysis of mechanical structures (with Prof. T.K. Kundra)