Publications



    Books


    • My book on Modal analysis:

           Subodh V. Modak, "Analytical and Experimental Modal Analysis", 2023, CRC Press, Taylor & Francis Group

           Click to see Book Flyer

           Click for more information about the book


    Research Publications


      Journal Papers


      1) Asish Kumar Panda, S.V. Modak, 2023 Journal of Sound and Vibration , A two-stage approach to stochastic finite element model updating using FRF data, 553, 117670.


      2) Asish Kumar Panda, S.V. Modak, 2022 Mechanical Systems and Signal Processing, An FRF-based perturbation approach for stochastic updating of mass, stiffness and damping matrices, 166, 108416.


      3) Amrita Puri, S.V. Modak, K. Gupta, 2019 Applied Acoustics , Global active control of harmonic noise in a vibro-acoustic cavity using Modal FxLMS algorithm, 150, 147–161.


      4) Amrita Puri, S.V. Modak, K. Gupta, 2019 Journal of Sound and Vibration , Global active noise control in vibro-acoustic cavities using acoustic sensing, 455, 256-274.


      5) D.V. Nehete, S.V. Modak, K. Gupta, 2019 Applied Acoustics , Experimental studies in finite element model updating of vibro-acoustic cavities using coupled modal data and FRFs, 150, 113–123.


      6) Amrita Puri, S.V. Modak, K. Gupta, 2018 The Journal of the Acoustical Society of America , Global feedforward active noise control in vibro-acoustic cavities without increasing structural vibrations, 144, 3391.


      7) Amrita Puri, S.V. Modak, K. Gupta, 2018 Mechanical Systems and Signal Processing , Modal filtered-x LMS algorithm for global active noise control in a vibro-acoustic cavity, 110, 540–555.


      8) S. Pradhan, S.V. Modak, 2018 International Journal of Mechancial Sciences , A two-stage approach to updating of mass, stiffness and damping matrices, 140, 133–150.


      9) Ashok K. Bagha, S.V. Modak, 2017 Smart Structures Systems , Feedback control strategies for active control of noise inside a 3-D vibro-acoustic cavity, 20 (3)..


      10) Ashok K. Bagha, S.V. Modak, 2017 Journal of Low Frequency Noise, Vibration and Active Control , Active structural-acoustic control of interior noise in a vibro-acoustic cavity incorporating system identification, (1-16), DOI: 10.1177/0263092317719636.


      11) Amrita Puri, S.V. Modak, K. Gupta, 2016 ISME Journal of Mechanics and Design , Study of FxLMS algorithm for active noise control inside a cavity, 1(1), 9-22.


      12) Amrita Puri, S.V. Modak, K. Gupta, 2016 Noise Control Engineering Journal , A variable step-size filtered-x least mean square algorithm for active control of continuously varying noise, 64 (4).


      13) S. Pradhan, S.V. Modak, 2016 International Journal of Structural Stability and Dynamics , Damping matrix identification through FE model updating using frequency response data, DOI: 10.1142/S0219455417500043.


      14) D.V. Nehete, S.V. Modak, K.Gupta, 2016 Mechanical Systems and Signal Processing , Coupled vibro-acoustic model updating using frequency response functions, 70-71, 308–319.


      15) Ashok K. Bagha, S.V. Modak, 2015, Journal of the Acoustical Society of America, Structural sensing of interior sound for active control of noise in structural-acoustic cavities, 138 (1), 11-31.


      16) Ashok K. Bagha, S.V. Modak, 2015, Journal of the Acoustical Society of India, Feedback Control Strategies for Active Structural Acoustic Control of Interior Noise, 42(2), 84-94.


      17) D.V. Nehete, S.V. Modak, K.Gupta, 2015, Mechanical Systems and Signal Processing , Structural FE model updating of cavity systems incorporating vibro–acoustic coupling, 50-51, 362–379.


      18) S.V. Modak, 2015, American Institute of Aeronautics and Astronautics Journal, Uncorrelated Modes Driven Inverse Eigensensitivity Method for Finite Element Model Updating, 53(6), 1468-1476.


      19) S.V. Modak, 2014, Journal of Sound and Vibration, Model updating using uncorrelated modes, 333, 2297–2322.


      20) S.V. Modak, 2014, American Institute of Aeronautics and Astronautics Journal, Direct matrix updating of vibro-acoustic Finite Element models using modal test data, 52(7), 1386-1392


      21) S.V. Modak, 2013, Mechanical Systems and Signal Processing, Separation of structural modes and harmonic frequencies in Operational Modal Analysis using random decrement. 41, 366–379


      22) M. Chouksey, J.K. Dutt & S.V. Modak, 2013 Mechanism and Machine Theory , Model updating of rotors supported on journal bearings, 71, 52-63.


      23) M. Chouksey, J.K. Dutt & S.V. Modak, 2013, Measurement , Model updating of rotors supported on ball bearings and its application in response prediction and balancing, 46(10), 4261-4273


      24) M. Chouksey, J.K. Dutt & S.V. Modak, 2013, Journal of the Institution of Engineers (India) - Series C , Updating Bearing Stiffness and Damping Coefficients of a Rotor System, 94(4), 365-372.


      25) S.D.Dhandole and S.V. Modak, 2013, Advances in Vibration Engineering, Effectiveness of Updated Vibro-Acoustic Models for Analysis of Interior Noise in Cavities, 12(4), 369-376.


      26) S. Pradhan, S.V. Modak, 2012, Mechanical Systems and Signal Processing , A method for damping matrix identification using frequency response data, Volume 33, Pages 69-82.


      27) S. Pradhan, S.V. Modak, 2012, Mechanical Systems and Signal Processing , Normal response function method for mass and stiffness matrix updating using complex FRFs, Volume 32, Pages 232-250.


      28) M. Chouksey, J.K. Dutt & S.V. Modak, 2012, Journal of vibration engineering & technologies , Experimental modal analysis studies for spinning rotor-shaft system, 2(4), 335-340.


      29) M. Chouksey, J.K. Dutt & S.V. Modak, 2012, Journal of vibration engineering & technologies , Modal analysis of a flexible internally damped rotor shaft system with bearing anisotropy, 2(1), 19-25.


      30) M. Chouksey, J.K. Dutt & S.V. Modak, 2012 Mechanism and Machine Theory , Modal Analysis of rotor-Shaft system under the influence of rotor-shaft material damping and fluid film forces, Vol 48, 81-93.


      31) S.V. Modak, T.K. Kundra and Gaurav Singh 2012 Advances in Vibration Engineering , Dynamic Design through Modal Modals obtained by Operational Modal Analysis, Volume 11(1), 99-112


      32) S.D.Dhandole and S.V. Modak, 2012 Journal of the acoustical society of India , Vibro-acoustic FE model updating of structural-acoustic cavities for accurate interior noise prediction, 39(2), 51-62.


      33) S.D.Dhandole and S.V. Modak, 2011 Applied Mathematical Modelling , A constrained optimization based method for acoustic finite element model updating of cavities using pressure response, Volume 36, Issue 1, Pages 399-413


      34) S.V. Modak 2011 Mechanical Systems and Signal Processing , Influence of a harmonic in the response on randomdec, signature, Volume 25, Issue 7, Pages 2673-2682


      35) S.D.Dhandole and S.V. Modak 2010 International Journal of Mechanics and Materials in Design , Volume 6, Number 1, 27-43, “A comparative study of methodologies for vibro-acoustic FE model updating of cavities using simulated data”


      36) S.D.Dhandole and S.V. Modak, 2010 Applied Acoustics , On improving weakly coupled cavity models for vibro-acoustic predictions and design, Volume 71, Issue 9, Pages 876-884


      37) S.V. Modak, Chetan Rawal and T.K. Kundra 2010 Mechanical Systems and Signal Processing , “Harmonics Elimination Algorithm for Operational Modal Analysis using random decrement technique”, 24, 922–944


      38) S.V. Modak and B.S. Gandhare 2005 Journal of Institution of engineers (India) 86, pp. 66-71. Prediction of Vibration Characteristics using Structural Dynamic Modification


      39) S.V. Modak, T.K. Kundra and B.C. Nakra 2005 Journal of Sound and Vibration 281, pp. 943-964. Studies In Dynamic Design Using Updated Models


      40) S.V. Modak, T.K. Kundra and B.C. Nakra 2002 Computers and Structures 80(5&6), pp. 437-447. Comparative study of model updating methods using simulated experimental data.


      41) S.V. Modak, T.K. Kundra and B.C. Nakra 2002 Mechanical Systems and Signal Processing 16(2), pp. 303-322. Use of an updated finite element model for dynamic design


      42) S.V. Modak, T.K. Kundra and B.C. Nakra 2002 Journal of Sound and Vibration 254(3), pp. 447-467. Prediction of dynamic characteristics using updated finite element models


      43) S.V. Modak, T.K. Kundra and B.C. Nakra 2000 Mechanics Research Communications 27(5), pp. 543-551. Model updating using constrained optimization.




      Conference Papers



      1) Rojen Koshy John, S.V. Modak, T.K.Kundra, (2023), Acoustic Finite Element Model Updating Using Acoustic Transfer Functions, 21st ISME International Conference on Advances in Mechanical Engineering (ISME-2023) PES University, Bengaluru, India, 13– 15 July, 2023


      2) N. Sharma, S.V. Modak, (2021), Robust identification of parameters uncertainty in stochastic finite element model updating, Proceedings of the XVI Vibration Engineering & Technology of Machinery Conference (VETOMAC), December 16 - 18, 2021, B.M.S. College of Engineering, Bengaluru, India


      3) Asish Kumar Panda, S.V. Modak, (2021), Stochastic Updating of Mass, Stiffness and Damping Matrices for Damped Structures, Proceedings of the XVI Vibration Engineering & Technology of Machinery Conference (VETOMAC), December 16 - 18, 2021, B.M.S. College of Engineering, Bengaluru, India


      4) Asish Kumar Panda, S.V. Modak, (2021), AN EXPERIMENTAL STUDY OF VARIABILITY IN DAMPING, FREQUENCY RESPONSE AND MODAL DATA, International Conference on Uncertainty Quantification in Computational Sciences and Engineering, Athens, Greece, 27–30 June 2021


      5) Amrita Puri, S.V. Modak, K. Gupta, (2018), Kalman filter based active noise control for vibro-acoustic cavities, Proceedings of the FISITA 2020 World Congres, Prague, 14 – 18 September 2020


      6) S.V. Modak, Nikhil Saxena, T.K. Kundra, (2018), Damage detection in structures using a substructruring based model updating approach, 26th International Congress on Sound and Vibration (ICSV26), Montreal, Canada, July 7-11, 2019


      7) N. Sharma, S.V. Modak, (2018), Robust identification of parameters uncertainty in stochastic finite element model updating, Proceedings of ISMA2018 International Conference on Noise and Vibration Engineering, KU Leuven, Belgium, 17-20 September 2018


      8) Amrita Puri, S.V. Modak, K. Gupta, (2018), New results about active control of acoustic potential energy of vibro-acoustic cavities under acoustic and structural disturbances, in: WESPAC 2018 - 13th Western Pacific Conf. on Act., CSIR-NPL, New Delhi, India, Nov. 11 – 15, 2018


      9) Amrita Puri, S.V. Modak, K. Gupta, (2018), Modal filtered-x LMS algorithm utilising Kalman filter, in: WESPAC 2018 - 13th Western Pacific Conf. on Act., CSIR-NPL, New Delhi, India, Nov. 11 – 15, 2018


      10) Ashok Kumar, S.V. Modak, (2017) Active Structural-Acoustic Control of Interior Noise using Direct Output Feedback- an Experimental Study, Proceedings of the ICCAE '17, February 18-21, 2017, Hongkong


      11) Amrita Puri, S.V. Modak, K. Gupta, (2015) A novel variable step-size filtered-x least mean square algorithm for continually varying noise, 44th Inter-Noise Congress & Exposition on Noise Control Engineering, INTER-NOISE conference, San-Francisco, California, USA, 6-9 August, 2015


      12) Amrita Puri, S.V. Modak, K. Gupta, (2015) Study of FX-LMS algorithm for active noise control inside a cavity, Proceedings of the 17th the Indian Society of Mechanical Engineers (ISME) Conference on Advances in Mechanical Engineering, IIT Delhi, New Delhi, October 3-4, 2015


      13) Ashok Kumar, S.V. Modak, (2015) Active structural-acoustic control of interior noise using direct output feedback, Proceedings of the 17th ISME conference on Advances in Mechanical Engineering to be held at IIT Delhi, New Delhi, October 3-4, 2015


      14) S. Pradhan, S.V. Modak (2015), Numerical and experimental investigations into mass, stiffness and damping matrix updating through a two-stage framework, International Conference on Engineering Vibration, Ljubljana, Slovenia, 7-10 September 2015


      15) Ashok Kumar, S.V. Modak, (2014), International conference INTERNOISE 2014, Melbourne, Australia, 16-19 November 2014, A study on the influence of model uncertainties on the performance of a feedback control based ASAC system.


      16) D.V. Nehete, S.V. Modak, K. Gupta, (2014), A Method for Vibro-Acoustic FE Model Updating of Cavities Using Frequency Response, Proceedings of the 10th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-X), University of Manchester, UK, (September 9-11, 2014) 1033-1041


      17) Ashok Kumar, S.V. Modak (2014), Proceedings of International Modal Analysis conference (IMAC-XXXII), Orlando, Florida, USA, Virtual Sensing of Acoustic Potential Energy through Kalman Filter for Active Control of Interior Sound


      18) D.V. Nehete, S.V. Modak, K. Gupta, (2013), Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition IMECE2013 November 15-21, 2013, San Diego, California, USA, IMECE2013-66843, A method for FE model updating of coupled vibro-acoustic systems using constrained optimization


      19) D.V. Nehete, S.V. Modak, K. Gupta, (2013), ACOUSTICS 2013 New Delhi, India, November 10-15, 2013, An iterative method for FE model updating of Vibro-acoustic cavities using modal data, 1287-1293.


      20) S. Pradhan, S.V. Modak (2012), Mass and Stiffness Matrix Updating of Damped & Coupled Structure Using Normal Response Function Method, Proceedings of ISMA2012 International Conference on Noise and Vibration Engineering, KU Leuven, Belgium


      21) S. Pradhan, S.V. Modak (2012), A Review of Damping Matrix Identification methods in Structural Dynamics, Paper No. IMECE2012-85052, ASME 2012 International mechanical engineering congress, Houston, Texas, November 9-15, 2012.


      22) S. Pradhan, S.V. Modak (2012), Normal Response Function Method For FE Mass and Stiffness Matrix Updating, 15th International Conference on Experimental mechanics (ICEM15), Porto/Portugal, 22-27 July 2012


      23) M. Chouksey, J.K. Dutt & S.V. Modak, (2012), Experimental modal analysis studies for spinning rotor-shaft system, International Conference on Vibration Engineering and Technology of Machinery, (VETOMAC) held at The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdansk, Poland, 3-7 Sept, 2012


      24) M. K. Choudhury, S.V. Modak and T. K Kundra, (2011), Finite Element Model Updating and Dynamic Design of Spot Welded Structures, Conference Proc. of Society of Experimental Mechanics, 2011, Volume 13, 99-108. DOI: 10.1007/978-1-4419-9831-6-12


      25) S.D.Dhandole and S.V. Modak, (2010), Effectiveness of Updated Vibro-Acoustic Models for Analysis of Interior Noise in Cavities, Proceedings of 6th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-VI) IIT Delhi, Dec 13-15, 2010.


      26) M. Chouksey, J.K. Dutt & S.V. Modak, (2010), Modal analysis of a flexible internally damped rotor-shaft system with bearing anisotropy, Proceedings of 6th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-VI) IIT Delhi, 177-185.


      27) M. Chouksey, J.K. Dutt & S.V. Modak, (2010), Influence of rotor-shaft material damping on modal and directional frequency response characteristics, Proceedings of ISMA-2010, Katholieke Universiteit Leuven, Belgium, 1543-1557.


      28) S.D.Dhandole and S.V. Modak, (2009) Simulated studies in FE model updating with application to Vibro- acoustic analysis of the cavities, Symposium on Vibration and Structural Acoustics Analysis -IRF2009, Porto, Portugal.


      29) S.D.Dhandole and S.V. Modak, (2009) Analytical and Experimental Vibro-Acoustic Modal Analysis of a Coupled Rectangular Cavity with a Flexible Plate, Conference on Emerging research and advances in Mechanical engineering, Velammal Engg. College, Chennai, India ,2009.


      30) Shaikh Shoeb, T. K. Kundra, S.V. Modak, (2008) A Building Block Approach to Finite Element Model Updating of Structures IISc Centenary International Conference on Advances in Mechanical Engineering (IC-ICAME), Bangalore, India.


      31) Sandeep Kumar, T.K. Kundra, S.V. Modak 2006 Model Updating Studies on a Two Wheeler Chassis”, Paper no. 07NVC-082 Proceedings of the SAE Conference.


      32) A.C. Gondhalekar, T.K. Kundra, S.V. Modak, (2007) Dynamic Design of a Complex automobile Structure via Finite Element Model Updating, International Modal Analysis Conference (IMAC-XXV), USA


      33) S.D. Dhandole, S.V. Modak, (2007) Review of Vibro-Acoustics analysis procedures for prediction of low frequency noise inside a Cavity International Modal Analysis conference (IMAC-XXV), USA


      34) S.V. Modak (2003) 11th National Conference on Machines and Mechanisms (NaCoMM), IIT, Delhi, pp. 500-508. Vibration Analysis of Coupled Structures using Impedance Coupling Approach


      35) S.V. Modak (2001) Proceedings of the 17th National Convention of Mechanical engineers, Indore, India, pp. 152-157. Field Balancing of a Thin Disc Using Four Measurements - Mathematical Relationships.


      36) S.V. Modak (2001) Proceedings of the 17th National Convention of Mechanical engineers, Indore, India, pp. 146-151. Prediction Of Dynamic Characteristics For Structural Mass Modification Using Experimental Data.


      37) S.V. Modak, T.K. Kundra and B.C. Nakra (2000) Proceedings of the SDRC India User's Conference, Pune. Validation of a finite element model using modal test data


      38) S.V. Modak, T.K. Kundra and B.C. Nakra (2002) Proceedings of the 20th International Modal Analysis Conference (IMAC), USA, pp. 1489-1494. Dynamic Design Improvement of Machine Tool Structures via Model Updating and Structural Modification.


      39) T. Tomatsu, M. Okuma, S.V. Modak, T.K. Kundra (2002) Proceedings of ISMA 2002, International Conference on Noise and Vibration Engineering, Leuven, Belgium. Identification and prediction of F-shape structure dynamics by spatial matrix identification method


      40) T.K. Kundra, S.V. Modak and B.C. Nakra (2001) Proceedings of the Second Indo-US Symposium on Vibration and Noise, Ohio, USA. Model Updating and Dynamic Design


      41) S.V. Modak, T.K. Kundra and B.C. Nakra (2001) Proceedings of the Second Indo-US Symposium on Vibration and Noise, Ohio, USA. Dynamic Design Using Updated Models


      42) S.V. Modak, T.K. Kundra and B.C. Nakra (2000) Proceedings of the 7th International Congress on Sound and Vibration, Germany, pp. 885-892. Simulated experimental data driven comparative studies of model updating methods.